Toshiba S1 User Manual - Page 112

POWER AND POWER-UP MODES Power conditions Table 6-1 Power conditions continued AC 2nd battery adaptor charge not is above connected low battery trigger point 2nd battery charge is below low battery trigger point 2nd battery charge is exhausted No 2nd battery is installed Power on • Operates • LED: 2nd battery off DC IN off • Operates • LED: 2nd battery flash orange DC IN off Computer shuts down *3 • No operation *5 • LED: 2nd battery off DC IN off Power off (no operation) NOTE: 2nd battery indicator refers to the Slim Select Bay indicator when a secondary battery is installed. *1 When the secondary battery is not charging. *2 When the main battery is not charging *3 For the computer to shut down in hibernation mode, the hibernation feature must be enabled in two places in TOSHIBA Power Saver: the Hibernate window and the Battery Alarm item of the Alarm window. If a main battery and a secondry battery are installed, the computer does not shut down until the charge in both batteries is exhausted. *4 When no secondary battery is installed *5 When no main battery is installed NOTE: When batteries are charged, the main battery is charged first. When it is fully charged, the secondary battery is charged. 6-3