Toshiba S1 User Manual - Page 82

Writing CD/DVDs on DVD Multi drive When writing or rewriting Note the following when you write or rewrite a CD-R or CD-RW. ◆ Always copy data from the HDD to the CD. Do not use cut-and-paste. The original data will be lost if there is a write error. ◆ Do not perform any of the following actions: • Operate the computer for any other function, including use of a mouse or Touch Pad, closing/opening the LCD panel. • Start a communication application such as a modem. • Apply impact or vibration to the PC. • Install, remove or connect external devices, including the following: PC card, SD card, USB devices, external display, i.LINK devices, optical digital devices. • Use the CD/MP3 control buttons to reproduce music and voice. • Open the optical media drive. ◆ If the media is poor in quality, dirty or damaged, writing or rewriting errors may occur. ◆ Set the computer on a level surface and avoid places subject to vibration such as airplanes trains, or cars. Do not use an unstable surface such as a stand. ◆ Keep mobile phones and other wireless communication devices away from the computer. Writing CD/DVDs on DVD Multi drive You can use the DVD Multi drive to write data to either CD-R/-RW or DVD-R/-RW/RAM discs. The following application for writing are supplied on CD-ROM: Drag'n Drop CD, licensed by Easy Systems Japan Ltd., and DigiOn Inc.. Important message Before you write or rewrite to CD-R/-RW or DVD-R/-RW/-RAM disc, read and follow all set-up and operating instructions in this section. If you fail to do so, the DVD Multi drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage. 4-13 OPERATING BASICS