Toshiba S1 User Manual - Page 146

OPTIONAL DEVICES Advanced Port Replicator II USB FDD Kit The 3 1/2" external FDD drive module can be connected to the USB port. For details on connecting the 3 1/2" external diskette drive module, refer to Chapter 4, Operating Basics. Advanced Port Replicator II In addition to the ports available on the computer, the Port Replicator provides, audio line-out jack, line-in jack and separate ports for PS/2 mouse and PS/2 keyboard. The Port Replicator connects directly to the docking interface on the bottom of the computer. The AC adaptor connects the Port Replicator to a power source. CAUTION: The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer's default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures. The following ports and accessories are available on the Port Replicator. ❑ One RJ45 LAN jack ❑ One RJ11 Modem jack ❑ External monitor port ❑ Parallel port ❑ Serial port ❑ PS/2 mouse port ❑ PS/2 keyboard port ❑ DC IN socket ❑ Security lock slot ❑ Audio line-in, line-out jacks ❑ Universal Serial Bus (two) ports ❑ i.LINK (IEEE 1394) port (This port is not supported by the computer.) ❑ DVI port (This port is not supported by the computer.) NOTES: 1. When a Port Replicator is connected to the computer, remove all cables connected to the computer. 2. The TECRA S1 does not support the DVI and i.LINK ports on the Port Replicator. 8-11