Toshiba Tecra S1 User Guide - Page 187

The message Bad XXXX XXXX appears after the, Toshiba logo is displayed.

Page 187 highlights

187 Troubleshooting Guide Problems when you turn on the computer The computer starts, but then shuts down and the on/off light glows amber and blinks. The computer has become too hot, so it has automatically shut down. Leave the computer turned off until its interior has reached room temperature (88 degrees Fahrenheit/30 degrees Celsius or less). If the computer will not start after it has been turned off for a while, remove the battery and reinsert it. For instructions on removing the battery, see "Changing batteries" on page 129. The computer starts but, when you press a key on the keyboard or touch the Dual Point device(s), nothing happens. To clear the condition, press Ctrl, Alt, and Del simultaneously. Clearing the condition may get you running, but it won't solve a resource conflict. Read the documentation that came with the conflicting device and "Resolving a hardware conflict" on page 188. The message "Boot system has changed" appears. Wait for the setting change to be completed. This may take several minutes. The message "Bad XXXX XXXX" appears after the Toshiba logo is displayed. Press F1 to enter the setup screen. Then press Home to make sure the computer settings are at their default values. The message "Warning: XXXX" appears after the Toshiba logo is displayed. Press Enter several times. The message "Password=" appears after the Toshiba logo is displayed. This message is displayed when the password has been set. If this message appears, enter the password and then press Enter.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280

187
Troubleshooting Guide
Problems when you turn on the computer
The computer starts, but then shuts down and the on/off
light glows amber and blinks.
The computer has become too hot, so it has automatically
shut down. Leave the computer turned off until its interior has
reached room temperature (88 degrees Fahrenheit/30 degrees
Celsius or less).
If the computer will not start after it has been turned off for a
while, remove the battery and reinsert it. For instructions on
removing the battery, see
“Changing batteries” on page 129
.
The computer starts but, when you press a key on the
keyboard or touch the Dual Point device(s), nothing
happens.
To clear the condition, press
Ctrl, Alt,
and
Del
simultaneously.
Clearing the condition may get you running, but it won't
solve a resource conflict. Read the documentation that came
with the conflicting device and
“Resolving a hardware
conflict” on page 188
.
The message “Boot system has changed” appears.
Wait for the setting change to be completed. This may take
several minutes.
The message “Bad XXXX XXXX” appears after the
Toshiba logo is displayed.
Press
F1
to enter the setup screen. Then press
Home
to make
sure the computer settings are at their default values.
The message “Warning: XXXX” appears after the
Toshiba logo is displayed.
Press
Enter
several times.
The message “Password=” appears after the Toshiba
logo is displayed.
This message is displayed when the password has been set. If
this message appears, enter the password and then press
Enter
.