Toshiba Tecra S1 User Guide - Page 74
Installing a memory module
View all Toshiba Tecra S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
74 Connecting Other External Devices Adding memory check. A message may display. If this occurs, contact Toshiba's support center at (800) 457-7777. Since your computer was built to order, it should have enough memory to run your current applications. However, if your requirements change, you can install extra memory. Installing a memory module Additional memory modules can be installed in the memory expansion slots on the base of the computer. You will need a standard Phillips no.1 screwdriver for this procedure. To avoid damaging the computer's screws, use a standard Phillips no. 1 screwdriver that is in good condition. The computer has one memory expansion slot. You can install one memory module. 1 Shut down your computer completely using the Shut Down command. See "Turning off the computer" on page 62. 2 Unplug the computer. Installing a memory module with the computer's power on may damage the computer, the module, or both. 3 Close the display panel and remove any cables you may have connected. 4 Remove the battery. 5 Turn the computer upside down. 6 Locate and remove the screw that holds the cover plate in place, and lift the cover off of the memory module bay.