Toshiba Tecra S1 User Guide - Page 199

199 Troubleshooting Guide Resolving a hardware conflict Modem problems The modem dials the line but does not connect, or cannot maintain the connection. You may be connected to a noisy telephone line. To check this, connect an ordinary telephone to the telephone line and try placing a phone call. If you hear an unusual amount of noise or static, try connecting the modem to a different telephone line or connecting at a later time. There may be an incorrect setting in the communications software. Refer to the communications software documentation to customize the modem settings. The modem will not receive or transmit properly. Make sure the RJ-11 cable (the one that goes from the modem to the telephone line) is firmly connected to the modem's RJ-11 jack and the telephone line socket. Check the serial port settings to make sure the hardware and software are referring to the same COM port. Check the communications parameters (baud rate, parity, data bits, and stop bits) specified in the communications program. The modem is on, configured properly, and still will not transmit or receive data. Make sure the line has a dial tone. Connect a telephone handset to the line to check this. The other system may be busy or off line. Try making a test transmission to someone else. Problems with the DVD-ROM or multi-function drive You cannot access a disc in the drive. Make sure the tray which holds the CD-ROM or DVD-ROM is closed properly. Press gently until it clicks into place.