Toshiba Tecra S1 User Guide - Page 204
Printer problems, There is still a yellow exclamation point, over
View all Toshiba Tecra S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
204 Troubleshooting Guide Resolving a hardware conflict 2 Click Stop xxxx, where xxxx is the identifier for your PC Card. Windows XP displays a message saying you may safely remove the card. 3 Remove the card from the slot. There is still a yellow exclamation point ( ) over the PCMCIA controller icon in Device Manager (Windows XP). You've installed the PC Card as described in "Using PC Cards" on page 109, but the system still reports the controller with a yellow exclamation point ( ). The PCMCIA.INI file may not be installed on your computer. Install it, referring to the Recovery media for the installation procedure. A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card's documentation, which should contain a troubleshooting section. Printer problems This section lists some of the most common printer problems. The printer does not print. Check that the printer is connected to a working electrical outlet and is turned on. Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray. Make sure the printer cable is firmly attached to both the computer and the printer.