Toshiba Tecra S1 User Guide - Page 191
Memory module problems, Start, Shut Down - drivers for xp
View all Toshiba Tecra S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
191 Troubleshooting Guide Resolving a hardware conflict ❖ The Resources tab, which lists the resources assigned to the device. If you have a device conflict, it is shown in the Conflicting device list. ❖ The Drivers tab, which displays the drivers being used by the device. For further information about Device Manager, refer to Windows XP online help. Memory module problems Incorrectly connected or faulty memory module may cause errors that seem to be device-related, so it's worthwhile checking for these first: 1 Click Start, then click Shut Down. Windows displays the Shut Down Windows dialog box. 2 Select Shut down, then click OK. Windows shuts down and turns off the computer automatically. 3 Remove the memory module following the instructions in "Removing a memory module" on page 76. 4 Reinstall the memory module following the instructions in "Installing a memory module" on page 74, and make sure it's seated properly. 5 Replace the memory expansion slot cover. 6 Check for the error again. 7 If the error recurs, remove the memory module entirely and check for the error again. NOTE This procedure can only be followed if there is more than one memory module in the computer. If there is only one memory card, removing will prevent the computer from booting up.