Yamaha CVP-201 Owner's Manual - Page 149
FUNCTION [MIDI 3] Display ム Receive Filter
View all Yamaha CVP-201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
MIDI q Control Change Messages Control change messages are used for various non-keyboard performance controls, such as the damper pedal, or for expressive control of the sound of a connected MIDI device, such as effects and volume. For example, the Clavinova can respond to control change messages transmitted from an external MIDI sequencer. (These messages do not affect the keyboard-played voices.) Similarly, an external MIDI device can be controlled by sending control change messages from the Clavinova to that device. (Control change messages are transmitted when operating the damper pedal, etc., on the Clavinova.) Set CONTROL to OFF to disable the transmission and reception of control change messages. The control change data recognized by the Clavinova is listed in detail on page 14 in the Reference Booklet. CONTROL • Settings: Tx&Rx (transmitted/received), OFF • Basic setting: Tx&Rx q System Exclusive Messages System exclusive messages are used for more advanced or detailed MIDI control, or for controls related to specific manufacturer's devices. Set SYS EX. to OFF to disable the transmission and reception of system exclusive messages. The system exclusive data recognized by the Clavinova is listed in detail on page 16 in the Reference Booklet. SYS EX. • Settings: Tx&Rx (transmitted/received), OFF • Basic setting: Tx&Rx q Start/Stop Commands A device that transmits the Start/Stop command can start and stop the rhythm or sequence data performance of a receiving device via MIDI. For example, you can transmit the Start/Stop command from an external MIDI sequencer to start and stop the Auto Accompaniment or song playback on the Clavinova. Also, an external MIDI sequencer or rhythm machine can be started and stopped by starting and stopping the Auto Accompaniment on the Clavinova. Set START/STOP to ON to enable the transmission and reception of Start/Stop commands. START/STOP • Settings: Tx&Rx (transmitted/received), OFF • Basic setting: OFF FUNCTION [MIDI 3] Display - page 11 s Receive Filter ...The Receive Filter function lets you prevent the Clavinova from receiving channel-specific MIDI messages - such as note data and control changes - on certain MIDI channels. This function is useful, for example, when you want to control some of the Clavinova's voices exclusively from an external sequencer, and others using only the Clavinova's keyboard or its built-in Auto Accompaniment and Song mode functions. (You can also have the Clavinova ignore channels carrying messages that are intended for another instrument connected to the Clavinova's MIDI [THRU] terminal.) By default, the Clavinova will receive messages on all 16 channels. Use the following procedure to enable or disable the reception of a channel: RECEIVE FILTER • Settings: ON, OFF (x 16) • Basic setting: ON (x 16) CVP-201 149 147