Yamaha CVP-201 Owner's Manual - Page 42

Reverb ➔ The LCD displays either the REVERB page or the REVERB DEPTH page (whichever was selected most recently). X Use the PAGE [] buttons to switch between the REVERB page and the REVERB DEPTH page. If you press the [>] button while the REVERB DEPTH page is showing, the CHORUS page will be displayed. Refer to the other sections of this chapter for details on chorus and other effect settings. s Changing the Reverb Type You can change the reverb type using the REVERB display. Use the TYPE v and w buttons to change the reverb type, or select the TYPE function and use the data dial or the [-] and [+] buttons. Reverb Type • Settings: See table on page 162. • Basic setting: Depends on style. ➔ The selected reverb type is highlighted. Because the basic setting of the reverb type depends on the accompaniment style, the reverb type may change automatically when you select a different style. s Setting the Total Depth The overall depth of the selected reverb effect can be set using the TOTAL DEPTH function in the REVERB display. Z Select the TOTAL DEPTH function. ➔ The TOTAL DEPTH function is highlighted. • The reverb type selection affects all voices played by the keyboard or Auto Accompaniment. Different settings cannot be made for each part. • Depending on the selected voice, the depth of the effect may sound stronger or weaker, even though the same reverb type is selected. • The reverb effect cannot be applied to the sounds input through the AUX IN [R] and [L/L+R] jacks. • It is also possible to apply reverb effects to the keyboard voices using the [EFFECT] button. See the Effect Type List on page 46 for details. • If both the [REVERB] and [EFFECT] buttons are turned on, both effects will be applied. TOTAL DEPTH • Range: 0 (no effect) - 127 (max.) • Basic setting: 64 40 42 CVP-201