Yamaha CVP-201 Owner's Manual - Page 43

Reverb X Set the total depth of the reverb effect. You can change the setting using the TOTAL DEPTH w and v buttons, the data dial, or the [-] and [+] buttons. To reset the value to the basic setting of 64, simultaneously press either the TOTAL DEPTH w and v buttons or the [-] and [+] buttons. s Setting the Reverb Depth for Each Part The settings in the REVERB DEPTH display (page 42) let you set the reverb depth separately for the rhythm and accompaniment parts, as well as the parts you play from the keyboard. Z Select a part. Press the LCD button corresponding to RHYTHM to set the reverb depth for the drum part, or ACMP to set it for all other accompaniment parts. Select LEFT, RIGHT1, or RIGHT2 to set the reverb depth for the corresponding keyboard part. ➔ The selected function is highlighted. • The TOTAL DEPTH setting globally affects all voices. Different settings cannot be made for each voice. • You can also set the reverb depth separately for the rhythm and accompaniment parts, and for each keyboard part. (See the next operation.) • You can also select several parts at once and adjust their settings simultaneously. X Set the reverb depth. Set the reverb depth for the highlighted part by using the data dial or [-] and [+] buttons. You can also advance a value by pressing the corresponding LCD button. To reset a value to its basic setting, simultaneously press the [-] and [+] buttons. Because the basic settings of the LEFT, RIGHT1, and RIGHT2 functions depend on the voices selected, a reverb depth setting may change automatically when you select a different part. RHYTHM and ACMP • Range: 0 (no effect) - 127 (max.) • Basic setting: 64 LEFT, RIGHT1, and RIGHT2 • Range: 0 (no effect) - 127 (max.) • Basic setting: Depends on voice. The amount of reverb that is applied to a part depends on both the part depth and TOTAL DEPTH settings. If one of the settings is 0, no reverb will be applied to that part even if the other setting is 127. 41 CVP-201 43