ZyXEL MI-7248 User Guide - Page 208

Chapter 36 VRRP Figure 101 VRRP Configuration The following table describes the labels in this screen. Table 79 VRRP Configuration LABEL DESCRIPTION Index This field displays the index number of an entry. Network This field displays the IP address and number of subnet mask bit of an IP domain. Authentication Select None to disable authentication. This is the default setting. Select Simple to use a simple password to authenticate VRRP packet exchanges on this interface. Key When you select Simple in the Authentication field, enter a password key (up to eight printable English keyboard character long) in this field. Apply Click Apply to save your changes to the switch's run-time memory. The switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Cancel Click Cancel to discard all changes made in this table. Use this section to configure various VRRP parameters. Active Select this option to enable this VRRP entry. Name Enter a descriptive name (up to 32 printable English keyboard characters) for identification purposes. Network Select an IP domain to which this VRRP entry applies. Virtual Router Select a virtual router number (1 to 7) for which this VRRP entry is created. ID You can configure up to seven virtual routers for one network. 208 MS-7206 User's Guide