ZyXEL MI-7248 User Guide - Page 55
Creating a VLAN
View all ZyXEL MI-7248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 5 Initial Setup Example 5.3 Creating a VLAN VLANs confine broadcast frames to the VLAN group in which the port(s) belongs. You can do this with port-based VLAN or tagged static VLAN with fixed port members. In this example, you want to configure port 1 in slot 3 as a member of VLAN 2. Figure 13 Initial Setup Network Example: VLAN Slot 3, Port 1 1 Click Advanced Application > VLAN > Static VLAN. 2 In the Static VLAN screen, select ACTIVE, enter a descriptive name in the Name field and enter 2 in the VLAN Group ID field for the VLAN2 network. 3 Select Slot 3 in the drop-down box above the port list. " The VLAN Group ID field in this screen and the VID field in the IP Setup screen (Section 5.1 on page 53) refer to the same VLAN ID. 4 Since the VLAN2 network is connected to port 1 in slot 3, select Fixed to configure port 1 to be a permanent member of the VLAN only. 5 To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames properly, clear the TX Tagging check box to set the switch to remove VLAN tags before sending. 6 Click Add to save the settings to the run-time memory. Settings in the run-time memory are lost when the MM-7201's power is turned off. MS-7206 User's Guide 55