ZyXEL MI-7248 User Guide - Page 232

Chapter 38 Access Control • A non-administrator (username is something other than admin) is someone who can view but not configure switch settings. Use this screen to change the administrator password and to manage non-administrator accounts. To open this screen, click Management > Access Control > Logins. Figure 120 Logins The following table describes the labels in this screen. Table 92 Logins LABEL DESCRIPTION Administrator This is the default administrator account with the "admin" user name. Only the administrator has read/write access. You cannot change the default administrator user name. Old Password Type the existing administrator password (1234 is the default password when shipped). New Password Enter your new administrator password. Retype to confirm Retype your new administrator password for confirmation Edit Logins You may configure passwords for up to four users. These users have read-only access. You can give users higher privileges via the CLI. For more information on assigning privileges see the CLI Reference Guide. User Name Set a user name (up to 32 English keyboard characters long). Password Enter your new user password. Retype to confirm Retype your new user password for confirmation Apply Click Apply to save your changes to the switch's run-time memory. The switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Cancel Click Cancel to reset the fields. 232 MS-7206 User's Guide