ZyXEL MI-7248 User Guide - Page 245

Figure 132 Syslog Server Setup Chapter 40 Syslog The following table describes the labels in this screen. Table 98 Syslog Server Setup LABEL DESCRIPTION Active Select this check box to have the system send logs to this syslog server. Clear the check box if you want to create a syslog server entry but not have the system send logs to it (you can edit the entry later). Server Address Enter the IP address of the syslog server. Log Level Select the severity level(s) of the logs that you want the system to send to this syslog server. The lower the number, the more critical the logs are. Add Click Add to save your changes to the switch's run-time memory. The switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Cancel Click Cancel to reset the fields. Clear Click Clear to return the fields to the factory defaults. Index This is the index number of a syslog server entry. Click this number to edit the entry. Active This field displays Yes if the system is to send logs to the syslog server. No displays if the system is not to send logs to the syslog server. IP Address This field displays the IP address of the syslog server. Log Level This field displays the severity level of the logs that the system is to send to this syslog server. Delete Select an entry's Delete check box and click Delete to remove the entry. Cancel Click Cancel to reset the fields. MS-7206 User's Guide 245