Cisco 2950 Hardware Installation Guide - Page 72

Installing and Removing SFP Modules Chapter 2 Installation Figure 2-32 Using the Mylar Tab Latch to Remove an SFP Module from a Slot 19 20 21 22 23 24 Catalyst 2950 SERIES LRE 1 2 1 2 81565 • If the module has an actuator button latch, use your thumb to push inward on the wedge to free the locking pin, and use your index finger to grip the ridge on top of the SFP module. Pull straight out to remove the module. Figure 2-33 Using the Actuator Button Latch to Remove an SFP Module from an SFP Module Slot 19 20 21 22 23 24 Catalyst 2950 SERIES LRE 1 2 1 2 81566 • If the module has a bale-clasp latch, pull the bale out and down to eject the module. If the bale-clasp latch is obstructed and you cannot use your index finger to open it, use a small, flat-blade screwdriver or other long, narrow instrument to open the bale-clasp latch. Figure 2-34 Removing a Bale-Clasp Latch SFP Module by Using a Flat-Blade Screwdriver 19 20 21 22 23 24 Catalyst 2950 LRE SERIES 1 2 1 2 Bale clasp 81567 Step 5 Step 6 Grasp the SFP module between your thumb and index finger, and carefully remove it from the module slot. Place the removed SFP module in an antistatic bag or other protective environment. 2-26 Catalyst 2950 Switch Hardware Installation Guide OL-6156-01