Cisco 2950 Hardware Installation Guide - Page 95
Fiber-Port Power Levels, Catalyst 2950C-24, 2950ST-24 LRE, and, Safety
UPC - 746320454504
View all Cisco 2950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Appendix A Technical Specifications Table A-6 Fiber-Optic Port Specifications for Catalyst 2950C-24, Catalyst 2950SX-24, and Catalyst 2950 LRE Switches Fiber-Port Power Levels Catalyst 2950C-24 Optical transmitter wavelength 1300 nm1 Optical receiver sensitivity -33.5 to for 50/125-micron cabling -11.8 dBm3 Optical receiver sensitivity -33.5 to for 62.5/125-micron -11.8 dBm cabling Optical transmitter power -23.5 to -14 dBm for 50/125-micron cabling Catalyst 2950SX-24 850 nm -13.5 dBm -12.5 dBm -9.5 to -4 dBm Catalyst 2950ST-8 LRE, 2950ST-24 LRE, and 2950ST-24 LRE 997 The transmitter wavelengths, receiver sensitivities, and transmitter power levels are SFP2-module dependent. For this information, see the technical specifications that came with your SFP module. Optical transmitter power -20 to -14 dBm for 62.5/125-micron cabling -9.5 to -4 dBm 1. nm = nanometers 2. SFP = small form-factor pluggable 3. dBm = decibel milliwatt Table A-7 Catalyst 2950 Switch Agency Approvals Safety UL/CSA 60950 IEC 60950/EN 60950 AS/NZS 3260, TS001 CE EMC FCC Part 15 Class A EN 55022: 1998 (CISPR22) Class A EN 55024: 1998 (CISPR24) VCCI Class A AS/NZS 3548 Class A CE CNS 13438 Class A MIC Table A-8 Catalyst 2950ST-8 LRE and 2950ST-24 LRE Switch Agency Approvals Safety EMC UL/CSA 60950, 3rd edition USA CFR47, FCC, Part 15, Class A IEC 60950 with Amendments A1 through ICES-003, Class A A4 and A11 AS/NZS 3260 with Amendments A1 through A4 EN55022/CISPR22, Class A, 1998 OL-6156-01 Catalyst 2950 Switch Hardware Installation Guide A-5