Cisco 521SG Administration Guide - Page 139

Configuring Security, Quality, and Network Features Setting Optional Network Servers 5 - PPPoE Login Name-The account name assigned by the ISP for connecting on a PPPoE link. - PPPoE Login Password-The password assigned by the ISP. - PPPoE Service Name-The service name assigned by the ISP. The Cisco SPA301 or Cisco SPA501G can be configured by using the IVR. See Using IVR on IP Phones Without Screens. Configuring Power Settings The Power-over-Ethernet (PoE) requirements requested of a PoE switch by the phone can be Normal (default) or Maximum. When one or more attendant consoles are attached to the phone, use Maximum to advertise to a PoE switch that the phone might consume up to 12 W. When no attendant consoles are attached, use Normal to advertise a required power budget of 6.5 Watts. To configure the (PoE) requirements, navigate to Admin Login > advanced > Voice > System. Under Power Setting select Normal or Maximum. Setting Optional Network Servers Optional network servers provide resources such as DNS lookup, network time, logging, and device discovery. To configure the (PoE) requirements, navigate to Admin Login > advanced > Voice > System. Under Optional Network Configuration configure the following fields: • Host Name-The host name of the phone. • Domain-The network domain of the phone. If using LDAP see Configuring LDAP for the Cisco SPA300 Series and Cisco SPA500 Series IP Phones. • Primary DNS-DNS server used by the phone in addition to the DHCP-supplied DNS servers (if DHCP is enabled), When DHCP is disabled, this is the primary DNS server. Defaults to 0.0.0.0. If using LDAP see Configuring LDAP for the Cisco SPA300 Series and Cisco SPA500 Series IP Phones. • Secondary DNS-DNS server used by the phone in addition to the DHCP-supplied DNS servers (if DHCP is enabled), When DHCP is disabled, this is the secondary DNS server. Defaults to 0.0.0.0. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 138