Cisco 521SG Administration Guide - Page 199

Configuring Dial Plans About Dial Plans 8 Digit Sequence Examples The following examples show digit sequences that you can enter in a dial plan. In a complete dial plan entry, sequences are separated by a pipe character (|), and the entire set of sequences is enclosed within parentheses: ( [1-8]xx | 9, xxxxxxx | 9, [2-9]xxxxxxxxx | 8, xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 ) Extensions on your system: ( [1-8]xx | 9, xxxxxxx | 9, [2-9]xxxxxxxxx | 8, xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 ) [1-8]xx Allows a user dial any three-digit number that starts with the digits 1 through 8. If your system uses four-digit extensions, you would instead enter the following string: [1-8]xxx Local dialing with seven-digit number: ( [1-8]xx | 9, xxxxxxx | 9, [2-9]xxxxxxxxx | 8, xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]111) 9, xxxxxxx After a user presses 9, an external dial tone sounds. The user can enter any seven-digit number, as in a local call. Local dialing with 3-digit area code and a 7-digit local number: ( [1-8]xx | 9, xxxxxxx | 9, [2-9]xxxxxxxxx | 8, xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 ) 9, [2-9]xxxxxxxxx This example is useful where a local area code is required. After a user presses 9, an external dial tone sounds. The user must enter a 10-digit number that begins with a digit 2 through 9. The system automatically inserts the 1 prefix before transmitting the number to the carrier. Local dialing with an automatically inserted 3-digit area code: EXAMPLE: ( [1-8]xx | 9, xxxxxxx | 9, [2-9]xxxxxxxxx | 8, xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 ) Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 198