Cisco 521SG Administration Guide - Page 21

Getting Started Using the Web-Based Configuration Utility 1 Allowing Web Access to the IP Phone To view the phone parameters by using the phone web user interface, the configuration profile must be enabled. To make changes to any of the parameters by using the phone web user interface, the configuration profile must be writable. Your system administrator might have disabled the phone option to make the phone web user interface viewable or writable. Cisco SPA303, Cisco SPA500 Series To allow or disallow from the phone viewing of the phone web user interface: STEP 1 Press the Setup button. STEP 2 To display the Web Server Writable option either: • Select Network > Enable Web Server. • Select Settings > Security Configuration > Web Access Enabled. STEP 3 Press Edit to change the status of the Web Access Enabled parameter. If the option to edit the parameter is not displayed, press **# to display the option. If the edit option still does not display, it might be set by your phone system administrator such that you cannot modify this parameter. STEP 4 Press Y/N to toggle the parameter and press ok to set the parameter. STEP 5 To save your change, press save. Making the Profile Writeable On some models you can enable modifying the configuration profile by using the phone web user interface or disable the ability to modify the profile making the phone web user interface read only. To toggle the write access: STEP 1 Press the Setup button. STEP 2 To display the Web Server Writable option, select Settings > Security Configuration > Web Server Writable. STEP 3 To change the status of the Web Server Writable, press Edit. STEP 4 Press Y/N to toggle the parameter and press OK to set the parameter. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 20