Cisco 521SG Administration Guide - Page 261
Vertical Service Announcement Codes, Service Annc Announcement Base Number: Defaults to blank.
UPC - 882658248993
View all Cisco 521SG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 261 highlights
Cisco SPA IP Phone Field Reference Regional Tab A Parameter Feature Dial Services Codes (continued Description The *codes should not conflict with any of the other vertical service codes internally processed by the Cisco SPA9000. You can empty the corresponding *code that you do not want to Cisco SPA9000 to process. You can add a parameter to each *code in Features Dial Services Codes to indicate what tone to play after the *code is entered, such as *72'c'|*67'p'. Below are a list of allowed tone parameters (note the use of back quotes surrounding the parameter without spaces) • c = Cfwd Dial Tone • d = Dial Tone • m = MWI Dial Tone • o = Outside Dial Tone • p = Prompt Dial Tone • s = Second Dial Tone • x = No tones are place, x is any digit not used above If no tone parameter is specified, the Cisco SPA9000 plays Prompt tone by default. If the *code is not to be followed by a phone number, such as *73 to cancel call forwarding, do not include it in this parameter. In that case, simple add that *code in the dial plan and the SPA9000 send INVITE *73@..... as usual when user dials *73. Vertical Service Announcement Codes • Service Annc (Announcement) Base Number: Defaults to blank. • Service Annc (Announcement) Extension Codes: Defaults to blank. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 260