Cisco 521SG Administration Guide - Page 226

Cisco SPA IP Phone Field Reference System Tab A Power Settings (Cisco SPA500 Series or Cisco SPA300 Series Only) Parameter PoE Power Required Description Specifies the PoE power setting: Normal (default) or Maximum. When one or more attendant consoles are attached to the phone, use Maximum to advertise to a PoE switch that the phone will consume up to 12 watts. When no attendant consoles are attached, use Minimum to advertise a required power budget of 6.5 watts. This parameter is not applicable to Cisco SPA301 or SPA303 as they do not have Cisco Attendant Console support. PPPoE Settings (Cisco SPA525G or Cisco SPA525G2 Only) Parameter PPPoE Login Name PPPoE Login Password PPPoE Service Name Description Specifies the account name assigned by the ISP for connecting on a Point-to-Point Protocol over Ethernet (PPPoE) link. Specifies the password assigned by the ISP for connecting on a Point-to-Point Protocol over Ethernet (PPPoE) link. Specifies the service name assigned by the ISP for connecting on a Point-to-Point Protocol over Ethernet (PPPoE) link. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 225