Cisco 521SG Administration Guide - Page 268

Cisco SPA IP Phone Field Reference Regional Tab A Parameter Daylight Saving Time Rule (continued) Daylight Saving Time Enable DTMF Playback Level DTMF Playback Length Inband DTMF Boost Description The value equals any value in the range 17 (Monday-Sunday). It can also equal 0. If the value is 0, this means that the date to start or end daylight saving is exactly the date given. In that case, the value must not be negative. If the value is not 0 and the value is positive, then daylight saving starts or ends on the value on or after the date given. If the value is not 0 and the value is negative, then daylight saving starts or ends on the value on or before the date given. Where: HH stands for hours (0-23). mm stands for minutes (0-59). ss stands for seconds (0-59). The default Daylight Saving Time Rule is start=4/1/ 7;end=10/-1/7;save=1. NOTE Found in the Time section for the Cisco SPA525G or Cisco SPA525G2. Select yes to enable Daylight Saving Time. NOTE Found in the Time section for the Cisco SPA525G or Cisco SPA525G2. Local DTMF playback level in dBm, up to one decimal place. Defaults to -16. Local DTMF playback duration in milliseconds. Defaults to .1. Controls the amount of amplification applied DTMF signals. Choices are OdB, 3dB, 6dB, 9dB, 12dB, 15dB, or 18dB. Defaults to 12dB. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 267