Cisco 521SG Administration Guide - Page 22

Getting Started Using the Web-Based Configuration Utility 1 STEP 5 To save your change, press Save. Cisco SPA501G To allow or disallow from the phone viewing of the phone web user interface by using the IVR: STEP 1 Press the Setup button on the phone. The configuration menu is announced. STEP 2 In the IVR menu, enter 7932. STEP 3 Press 1 to enable the web server, then press #. STEP 4 To save the configuration, press 1; to review, press 2; to re-enter, press 3; to exit, press *. Cisco SPA525G or Cisco SPA525G2 To view the phone parameters by using the phone web user interface, the phone web server must be enabled. Your system administrator might have disabled the phone option to make the phone web user interface viewable or writable. To allow or disallow from the phone viewing of the phone web user interface: STEP 1 Press Setup. STEP 2 To display the Web Server Writable option, select Settings > Network Configuration > Web Server. STEP 3 To change the status of the Web Server parameter, press the Right Arrow key to toggle the feature enabled (checked) or disabled (unchecked). STEP 4 To save your change, press Set. Cisco WIP310 To allow or disallow from the phone viewing of the phone web user interface: STEP 1 In the Home screen, press Select to choose Settings. STEP 2 Press Select again to reach the Settings menu. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 21