Cisco 521SG Administration Guide - Page 198
outside line, EXAMPLE, 1900x
UPC - 882658248993
View all Cisco 521SG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
Configuring Dial Plans About Dial Plans 8 Digit Sequence , (comma) ! (exclamation point) *xx S0 or L0 P Function An intersequence tone played (and placed) between digits plays an outside line dial tone. For example: 9, 1xxxxxxxxxx An outside line dial tone is sounded after the user presses 9. The tone continues until the user presses 1. Prohibits a dial sequence pattern. For example: 1900xxxxxxx! Rejects any 11-digit sequence that begins with 1900. Allows a user to enter a 2-digit star code. For Interdigit Timer Master Override, enter S0 to reduce the short inter-digit timer to 0 seconds, or enter L0 to reduce the long inter-digit timer to 0 seconds. To pause, enter P, the number of seconds to pause, and a space. This feature is typically used for implementation of a hot line and warm line, with a 0 delay for the hot line and a non-zero delay for a warm line. For example: EXAMPLE: P5 A pause of 5 seconds is introduced. NOTE The Cisco SPA9000 and the Cisco IP phones implicitly append the vertical code sequences entered in the regional parameter settings to the end of the dial plan. Likewise, if Enable_IP_Dialing is enabled, IP dialing is also accepted on the associated line. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 197