Cisco 7921G Administration Guide - Page 134

Installing the Cisco Unified Wireless IP Phone 7921G Configuration Utility Chapter 6 Configuring the Phone Using the Wavelink Avalanche Server Table 6-2 lists the configuration file settings. Table 6-2 Configuration File Settings Setting Profile Settings WLAN Settings Network Settings USB Settings Trace Settings Wavelink Settings For more information, see... Configuring Profile Settings, page 6-6 Configuring USB Settings, page 6-9 Configuring Trace Settings, page 6-9 Configuring Wavelink Avalanche Server Settings, page 6-10 To update settings in the phone configuration file, follow these steps: Procedure Step 1 Step 2 Step 3 Step 4 Right click 7921CU (in a folder under Software Collections) to launch the configuration utility. From the left pane, choose the settings you wish to configure: Profile Settings, USB Settings, Trace Settings, or Wavelink Settings. From the Settings page, select or enter information for those settings. Click Apply. Configuring Profile Settings Table 6-3 lists the profile settings. To configure the scanning mode, which can only be configured in Cisco Unified Communications Manager Administration, see Product-Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G, page 7-13. Note See also Network Profile Settings, page 4-8, in the Using the Cisco Unified Wireless IP Phone 7921G Web Pages chapter. Table 6-3 Profile Settings Item Profile Name Profile Enabled WLAN Settings SSID Description Provides a name for the profile to make it easy to identify; up to 63 alphanumeric characters. Choose Yes or No. For More Information, See... Assigns the Service Set Identifier (SSID) to this profile. You must assign the same SSID to the phone that is also assigned to access points in the wireless network. Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0 6-6 OL-15985-01