Cisco 7921G Administration Guide - Page 77

Chapter 4 Using the Cisco Unified Wireless IP Phone 7921G Web Pages Updating Phones Remotely Note If a wireless IP phone was previously registered to Cisco Unified CallManager Administration Release 4.x, and you try to register to Cisco Unified Communications Manager Administration 5.x or later, the Phone Configuration web page password might be set to "Cisco." HOME: Summary Web Page The HOME: Summary web page displays device settings and related information for the phone. At the top of the web page, the SEP number and Phone DN display. Table 4-1 describes the items available from the HOME: Summary section of the web page. Table 4-1 HOME: Summary Web Page Item Home: Summary Active Network Profile SSID Access Point MAC Address Network Information IP Address Subnet Mask Default Router TFTP Server Call Manager Information Active Call Manager Phone Directory Number Description Name of the profile that the phone is currently using. SSID that the phone is currently using. Name of the access point (AP) to which the phone is associated. MAC address of the phone. IP address of the phone. Subnet mask used by the phone. IP address for the default gateway that the phone is using. IP address for the Primary TFTP server that the phone is using. IP address for the Cisco Unified Communications Manager server to which the phone is registered. Primary DN for the phone. Related Topics • Accessing the Phone Web Page, page 4-3 • Configuring Network Profiles, page 4-8 • Configuring USB Settings, page 4-28 • Configuring Trace Settings, page 4-29 • Configuring the Phone Book, page 4-31 • Using System Settings, page 4-36 OL-15985-01 Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0 4-7