Cisco 7921G Administration Guide - Page 135
Table 6-3, Profile Settings continued, Call Power Save Mode
UPC - 882658123108
View all Cisco 7921G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Chapter 6 Configuring the Phone Using the Wavelink Avalanche Server Installing the Cisco Unified Wireless IP Phone 7921G Configuration Utility Table 6-3 Profile Settings (continued) Item WLAN Mode Description For More Information, See... Determines the signal mode or priority for selecting signal modes available in the WLAN. Options are: 802.11 Standards for WLAN Communications, page 2-3 • 802.11 b/g-Use only 2.4 GHz band • 802.11a-Use only 5 GHz band • Auto, 802.11b/g preferred over 802.11a (dual band) • Auto, 802.11a preferred over 802.11b/g (dual band) Note The preferred band, if available, will be used at power-on, but the phone may switch to the less preferred 2.4 GHz band, if available, and the preferred band is lost. Once the phone has connected to the less preferred band, it will not scan for the preferred band if the current band is acceptable, and may remain connected to the less preferred band. Call Power Save Mode WLAN Security Authentication Mode Wireless Security Credentials Username Password • Auto, signal strength (RSSI)-Use strongest signal in dual band environment Automatically detects the type of power saving mode that active and idle phones require. The phone can use U-APSD or PS-Poll when it is idle. When the phone is in an active call, the power save mode is controlled by Call Power Save Mode. 802.11 Standards for WLAN Communications, page 2-3 Sets the authentication and encryption methods for this profile: • Open-Open access to APs • Open+WEP-Open access with WEP encryption (requires an encryption key) • Shared+WEP-Shared key authentication with WEP (requires an encryption key) • LEAP-Cisco proprietary authentication and encryption using a RADIUS server (requires a username and password) • EAP-FAST-Authentication and encryption using TLS and RADIUS server (requires a username and password) • Auto (AKM)-Automatic authenticated key management using: - WPA, WPA2 (requires a username and password) - WPA-Pre-shared key, WPA2-Pre-shared key (requires a passphrase/pre-shared key) - CCKM (requires a username and password) Required for LEAP, EAP-FAST, and Auto (AKM) authentication methods Assigns the network authentication username for this profile Assigns the network authentication password for this profile OL-15985-01 Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0 6-7