Cisco 7921G Administration Guide - Page 82
Configuring IP Network, Settings, Configuring the Alternate, TFTP Server
UPC - 882658123108
View all Cisco 7921G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Configuring Network Profiles Chapter 4 Using the Cisco Unified Wireless IP Phone 7921G Web Pages Table 4-2 Network Profile Settings Items (continued) Item Description For More Information, See... IP Network Configuration Obtain IP address and Enables DHCP DNS servers automatically Configuring IP Network Settings, page 4-25 Use the following IP address and DNS servers Disables DHCP and uses these static settings: • IP Address • Subnet Mask • Default Router • Primary DNS • Secondary DNS • Domain Name TFTP Obtain TFTP servers Determines whether DHCP assigns the TFTP Configuring the Alternate automatically server TFTP Server, page 4-26 Use the following TFTP servers Assigns static TFTP server IP addresses for: • TFTP Server 1 • TFTP Server 2 Network Profile Advanced Settings TSPEC Settings Minimum PHY Rate Minimum data rate that outbound traffic uses Note Cisco APs support only PHY rates of 6, 11, 12, or 24. Configuring Advanced Network Profile Settings, page 4-27 Surplus Bandwidth Excess bandwidth beyond application requirements Antenna Settings Antenna Selection for • Vertical 802.11A • Horizontal • Diversity Antenna Selection for • Vertical 802.11G • Horizontal 802.11G Power Settings • Diversity Channel Enabled Identifies enabled channels in WLAN to improve scanning for the phone Max Tx Power Sets the maximum transmit power for the phone Check All/Clear All/Check Non-overlap Three buttons that check all channels and Tx power levers, or clear all. The non-overlap button disables overlap. 4-12 Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0 OL-15985-01