Cisco 7921G Administration Guide - Page 86

Configuring Network Profiles Chapter 4 Using the Cisco Unified Wireless IP Phone 7921G Web Pages Note If you use domains within your network, you must enter the username with the domain name, in this format: domain\username. For information about setting security credentials, see these topics: • Configuring the Username and Password, page 4-16 • Configuring the Pre-shared Key, page 4-16 • Setting Wireless Encryption, page 4-18 Configuring the Username and Password To enter or change the username or password for the network profile, you must use the same username and the same password string that is configured in the RADIUS server. The maximum length of the username or password entry is 32 characters. To set up the username and password in Wireless Security Credentials, follow these steps: Procedure Step 1 Step 2 Step 3 Step 4 Choose the network profile. In the Username field, enter the network username for this profile. In the Password field, enter the network password string for this profile. Click Save to make the change. Configuring the Pre-shared Key When using Auto (AKM) with WPA Pre-shared key or WPA2 with Pre-shared key for authentication, you must configure a Passphrase/Pre-shared key in the Wireless Security Credentials area. Pre-shared Key Formats The Cisco Unified Wireless IP Phone 7921G supports ASCII and hexadecimal formats. You must use one of these formats when setting up a WPA Pre-shared key: Hexadecimal For hexadecimal keys, you must enter 64 hex digits (0-9 and/or A-F); for example, AB123456789CD01234567890EFAB123456789CD01234567890EF3456789C ASCII For ASCII keys, you must enter a character string that uses 0-9, A-Z (upper and lower case), including symbols and is from 8 to 63 characters in length; for example, GREG12356789ZXYW 4-16 Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0 OL-15985-01