Cisco SPA525G Administration Guide - Page 259

SPA and Wireless IP Phone Field Reference Ext Tab B Parameter SIP Debug Option Refer Target Bye Delay Sticky 183 Description SIP messages are received at or sent from the proxy listen port. This feature controls which SIP messages to log. Choices are as follows: • none-No logging. • 1-line-Logs the start-line only for all messages. • 1-line excl. OPT-Logs the start-line only for all messages except OPTIONS requests/responses. • 1-line excl. NTFY-Logs the start-line only for all messages except NOTIFY requests/responses. • 1-line excl. REG-Logs the start-line only for all messages except REGISTER requests/responses. • 1-line excl. OPT|NTFY|REG-Logs the start-line only for all messages except OPTIONS, NOTIFY, and REGISTER requests/responses. • full-Logs all SIP messages in full text. • full excl. OPT-Logs all SIP messages in full text except OPTIONS requests/responses. • full excl. NTFY-Logs all SIP messages in full text except NOTIFY requests/responses. • full excl. REG-Logs all SIP messages in full text except REGISTER requests/responses. • full excl. OPT|NTFY|REG-Logs all SIP messages in full text except for OPTIONS, NOTIFY, and REGISTER requests/responses. Defaults to none. For the Refer Target Bye Delay, enter the appropriate period of time in seconds. Defaults to 0. If this feature is enabled, the IP telephony ignores further 180 SIP responses after receiving the first 183 SIP response for an outbound INVITE. To enable this feature, select yes. Otherwise, select no. Defaults to no. Cisco SPA and Wireless IP Phone Administration Guide 257