Cisco SPA525G Administration Guide - Page 261

SPA and Wireless IP Phone Field Reference Ext Tab B Parameter MOH Server Message Waiting Auth Page Default Ring Auth Page Realm Conference Bridge URL Auth Page Password Mailbox ID Cisco SPA and Wireless IP Phone Administration Guide Description User ID or URL of the auto-answering streaming audio server. When only a user ID is specified, the current or outbound proxy is contacted. Music-on-hold is disabled if the MOH Server is not specified. Defaults to imusic when used with a SPA9000 IP PBX. Indicates whether the Message Waiting Indicator on the phone is lit. This parameter is toggled by a message from the SIP proxy to indicate if a message is waiting. You can manually modify it to clear or set the flag in the Ext 1-6 tab. Setting this value to Yes can activate stutter tone and VMWI signal. This parameter is stored in long-term memory and survives after reboot or power cycle. Defaults to No. Specifies whether to authenticate the invite before auto answering a page. Defaults to No. Type of ring heard. This corresponds to the Ring Tone on the Phone tab. Choose from No Ring, 1 through 10, User 1, or User 2. Defaults to 1. Identifies the Realm part of the Auth that is accepted when the Auth Page parameter is set to Yes. This parameter accepts alphanumeric characters. Defaults to blank. This is the URL used to join into a conference call, generally in the form of the word "conference" or "user@IPaddress:port". Defaults to blank. Identifies the password used when the Auth Page parameter is set to Yes. This parameter accepts alphanumeric characters. Defaults to blank. Identifies the voice mailbox number/ID for the phone. Defaults to blank. 259