HP LaserJet Enterprise P3015 HP LaserJet P3010 Series - User Guide - Page 163
Control-panel messages continued, X PERMANENT STORAGE WRITE FAIL
View all HP LaserJet Enterprise P3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Table 10-1 Control-panel messages (continued) Control panel message Description Recommended action 58.XX ERROR For help press alternates with 58.XX ERROR To continue turn off then on A product error has occurred where a memory tag CPU error was detected, or there is a problem with the air sensor or power supply. To resolve problems with the power supply: 1. Remove the product from any UPS supplies, additional power supplies, or power strips. Plug the product into a wall outlet and see if this resolves the problem. 2. If the product is already plugged into a wall outlet, try another power source in the building that is independent of the one being used. Make sure the line voltage and current source meet the electrical specifications for the product. If the message persists, contact an HPauthorized service or support provider. 59.XY ERROR A temporary printing error occurred. 1. Turn the product off and then on. For help press alternates with 2. If the message persists, contact an HPauthorized service or support provider. 59.XY ERROR To continue turn off then on 68.X PERMANENT STORAGE FULL For help press alternates with 68.X PERMANENT STORAGE FULL To continue press OK The permanent storage is full. Some settings 1. If the error does not clear, turn the might have been reset to the factory defaults. product off and then on. 2. Print a configuration page and check the product settings to determine which values have changed. 3. To clean up permanent storage, turn the product off, and then press and hold the Menu button while turning the product on. 4. If the message persists, contact an HPauthorized service or support provider. 68.X PERMANENT STORAGE WRITE FAIL To continue press OK The storage device is failing to write. Printing can continue, but there might be some unexpected behaviors because an error occurred in permanent storage. Press the OK button to continue. If the error does not clear, turn the product off and then on. If the message persists, contact an HP-authorized service or support provider. 68.X STORAGE ERROR SETTINGS CHANGED For help press alternates with 68.X STORAGE ERROR SETTINGS CHANGED To continue press OK An error occurred in the product permanent storage and one or more product settings has been reset to its factory default. Press the OK button to resume printing. Print a configuration page and check the product settings to determine which values have changed. If the error does not clear, turn the product off and then on. If the message persists, contact an HP-authorized service or support provider. ENWW Interpret control-panel messages 151