HP LaserJet Enterprise P3015 HP LaserJet P3010 Series - User Guide - Page 83
Link speed and duplex settings, CON DEVICE, EMBEDDED JETDIRECT MENU, LINK SPEED
View all HP LaserJet Enterprise P3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Link speed and duplex settings The link speed and communication mode of the print server must match the network. For most situations, leave the product in automatic mode. Incorrect changes to the link speed and duplex settings might prevent the product from communicating with other network devices. If you need to make changes, use the product control panel. NOTE: Making changes to these settings causes the product to turn off and then on. Make changes only when the product is idle. 1. Press the Menu button . 2. Open each of the following menus. Press the down arrow to highlight it and then press the OK button to select it. a. CONFIGURE DEVICE b. I/O c. EMBEDDED JETDIRECT MENU d. LINK SPEED 3. Press the down arrow to highlight one of the following options. Setting AUTO 10T HALF 10T FULL 100TX HALF 100TX FULL 100TX AUTO 1000TX FULL Description The print server automatically configures itself for the highest link speed and communication mode allowed on the network. 10 megabytes per second (Mbps), half-duplex operation 10 Mbps, full-duplex operation 100 Mbps, half-duplex operation 100 Mbps, full-duplex operation Limits auto-negotiation to a maximum link speed of 100 Mbps 1000 Mbps, full-duplex operation 4. Press the OK button. The product turns off and then on. ENWW Network configuration 71