HP LaserJet Enterprise P3015 HP LaserJet P3010 Series - User Guide - Page 172
Use Tray <x> [type] [size], Usb Storage File Operation Failed
View all HP LaserJet Enterprise P3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Table 10-1 Control-panel messages (continued) Control panel message Description Recommended action USB ACCESSORY NEEDS TOO MUCH POWER The USB accessory is drawing too much Remove the USB accessory, and then restart electrical current. Printing cannot continue. the product. Remove USB accessory and then turn off then on Use a USB accessory that uses less power or that contains its own power supply. alternates with USB ACCESSORY NEEDS TOO MUCH POWER For help press USB accessory not recognized For help press alternates with The product does not support plug-and-play operation for the type of USB accessory in the host USB port, or the accessory is not supported With the USB accessory connected, turn the product off and then on. If the message reappears, remove the USB accessory. USB accessory not recognized To clear press OK USB printing unavailable For help press The administrator has disabled printing from Print the job from a computer that is USB accessories. connected to the product. USB storage accessory removed Clearing any unassociated data You have removed the USB accessory from To print the remaining jobs, reinsert the USB the product. The product cancels any jobs accessory and select the jobs again. from the accessory that are in the print queue. USB STORAGE DEVICE FAILURE The specified device has failed. Press the OK button to continue. To clear press OK USB STORAGE FILE OPERATION FAILED A command attempted an illogical operation. Press the OK button to continue. To clear press OK USE TRAY [TYPE] [SIZE] To change press / . To use press OK The product did not detect the type and size of paper requested. The message shows the most likely type and size available and the tray in which they are available. Press the OK button to accept the values in the message, or press the up or down arrow / to scroll through the available choices. USED SUPPLY IN USE Economode disabled The print cartridge has been previously used. If you believe you purchased a genuine HP supply, go to www.hp.com/go/ anticounterfeit. USED SUPPLY INSTALLED The print cartridge has been previously used. Press the OK button to use this cartridge, or install a new cartridge. If you believe you purchased a genuine HP supply, go to www.hp.com/go/ anticounterfeit. 160 Chapter 10 Solve problems ENWW