HP LaserJet Enterprise P3015 HP LaserJet P3010 Series - User Guide - Page 42
I/O menu, Embedded Jetdirect and EIO <X> Jetdirect menus
View all HP LaserJet Enterprise P3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
I/O menu Items on the I/O (input/output) menu affect the communication between the product and the computer. If the product contains an HP Jetdirect print server, you can configure basic networking parameters by using this submenu. You can also configure these and other parameters through HP Web Jetadmin or the embedded Web server. For more information on these options, see Network configuration on page 65. To display: Press the Menu button , select the CONFIGURE DEVICE menu, and then select the I/ O menu. NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no default. Item I/O TIMEOUT Sub-item Values Range: 5 - 300 EMBEDDED JETDIRECT MENU See the next table for a list of options. EIO JETDIRECT MENU Description Set the product I/O TIMEOUT in seconds. The default is 15 seconds. Adjust timeout for the best performance. If data from other ports appears in the middle of your print job, increase the timeout value. Embedded Jetdirect and EIO Jetdirect menus Item INFORMATION Sub-item Sub-item PRINT SEC PAGE Values YES* NO TCP/IP ENABLE HOST NAME ON* OFF Description YES: Prints a page that contains the current security settings on the HP Jetdirect print server. NO: A security settings page is not printed. ON: Enable the TCP/IP protocol. OFF: Disable the TCP/IP protocol. An alphanumeric string, up to 32 characters, used to identify the product. This name is listed on the HP Jetdirect configuration page. The default host name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware (MAC) address. 30 Chapter 2 Control panel ENWW