HP LaserJet Enterprise P3015 HP LaserJet P3010 Series - User Guide - Page 46

Item Sub-item Sub-item RESET SECURITY DIAGNOSTICS EMBEDDED TESTS Values YES NO* LAN HW TEST YES NO* HTTP TEST YES NO* SNMP TEST YES NO* DATA PATH TEST YES NO* SELECT ALL TESTS EXECUTION TIME [M] YES NO* EXECUTE YES NO* Description Specify whether the current security settings on the print server will be saved or reset to factory defaults. This menu provides tests to help diagnose network hardware or TCP/IP network connection problems. Embedded tests help to identify whether a network fault is internal or external to the product. Use an embedded test to check hardware and communication paths on the print server. After you select and enable a test and set the execution time, you must select the EXECUTE option to initiate the test. Depending on the execution time, a selected test runs continuously until either the product is turned off, or an error occurs and a diagnostic page is printed. CAUTION: Running this embedded test will erase your TCP/IP configuration. Perform an internal loopback test, which sends and receives packets only on the internal network hardware. There are no external transmissions on your network. Check operation of HTTP by retrieving predefined pages from the product, and test the embedded Web server. Check operation of SNMP communications by accessing predefined SNMP objects on the product. Identify data path and corruption problems on an HP postscript level 3 emulation product. This test sends a predefined PS file to the product. However, the test is paperless; the file does not print. Select all available embedded tests. Specify the length of time (in minutes) that an embedded test will run. You can select a value from 0 to 24 minutes. If you select zero (0), the test runs indefinitely until an error occurs or the product is turned off. Data gathered from the HTTP, SNMP, and Data Path tests is printed after the tests have completed. Select whether to initiate the selected tests. 34 Chapter 2 Control panel ENWW