HP Q7699A HP LaserJet 9040/9050 - User Guide - Page 125

Message Explanation or recommended action TOO MANY PAGES IN JOB TO STAPLE For help press The job is too large to staple. The job will be printed unstapled. Reduce the number of pages in the job to staple. TOO MANY PAGES IN JOB TO FINISH For help press The job height is greater than the finisher capacity. TOO MANY PAGES TO MAKE BOOKLET The page content is too large to be saddle stitched. UNABLE TO STORE JOB A job cannot be stored on the printer because of a memory, disk, or configuration problem. If job name is unknown, insert UNTITLED. Waiting for TRAY XX to lift The tray is in the process of lifting the paper to the top of the tray for feeding. 10.xx.yy SUPPLY MEMORY ERROR For help press The product cannot read or write to at least one supply e-label, or a supply elabel is missing. Reinstall the supply or install a new supply. 11.XX INTERNAL CLOCK ERROR To continue press The internal clock on this product is not working. The printer still prints, but a prompt appears to set the date and time whenever the printer is turned off and then turned on. Time stamping for documents and events might also be affected. To resolve this issue, contact an HP-authorized service or support provider. (See the HP support flyer, or go to www.hp.com/support/lj9050_lj9040.) 13.xy.zz JAM IN [LOCATION] Remove jammed paper from the specified location (see Clearing jams). Open and close the front door to clear the message. If the message persists after all jams have been cleared, a sensor might be stuck or broken. Contact an HP-authorized service or support provider. (See the HP support flyer, or go to www.hp.com/support/lj9050_lj9040.) 20 INSUFFICIENT MEMORY For help press alternates with To continue press The printer received more data than can fit in its available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics. Press to print the transferred data (some data might be lost), and then simplify the print job or install additional memory (see Printer memory and expansion). 21 PAGE TOO COMPLEX For help press alternates with To continue press The page formatting process was not fast enough for the printer. Press to print the transferred data. (Some data might be lost.) If this message appears often, simplify the print job or add printer memory. ENWW Resolving control-panel messages 123