HP Q7699A HP LaserJet 9040/9050 - User Guide - Page 174
Appendix B Control-panel menus, RESOLUTION, FASTRES 1200, RET=MEDIUM, LIGHT, MEDIUM, ECONOMODE, TONER
View all HP Q7699A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Item Values Explanation RESOLUTION= FASTRES 1200 300 600 FASTRES 1200 Select the resolution from the following values: 300: Produces draft print quality at maximum printer speed. 300 dpi (dots per inch) is recommended for some bitmapped fonts and graphics, and for compatibility with the HP LaserJet III family of printers. 600: Produces high print quality at maximum product speed. FASTRES 1200: Produces optimum print quality (comparable to 1200 dpi) at maximum product speed. Note It is best to change the resolution from the driver or software application. (Driver and software settings override control-panel settings.) RET=MEDIUM OFF LIGHT MEDIUM DARK Use printer Resolution Enhancement technology (REt) setting to produce print with smooth angles, curves, and edges. All print resolutions, including FastRes 1200, benefit from REt. Note It is best to change the REt setting from the driver or software application. (Driver and software settings override control-panel settings.) ECONOMODE ON OFF When set to ON, the printer prints with a reduced amount of toner per page; however, the print quality of the page is drastically reduced. TONER DENSITY=3 1 to 5 Lighten or darken the print on the page by changing the toner density setting. The settings range from 1 (light) to 5 (dark), but the default setting of 3 usually produces the best results. Note It is best to change the toner density from the driver or software application. (Driver and software settings override control-panel settings.) SMALL PAPER MODE=NORMAL NORMAL SLOW When printing narrow media the part of the fuser rollers that do not make contact with the media swell up and can cause wrinkles. 172 Appendix B Control-panel menus ENWW