HP Q7699A HP LaserJet 9040/9050 - User Guide - Page 58

Note 8-bin mailbox output bins If you choose the 8-bin mailbox, the output bins are the upper bin (4) and the eight face-down bins (3). The upper bin (4) holds up to 125 sheets of paper. The network administrator can assign the eight bins (3) to individual users or workgroups. Each bin can stack up to 250 sheets of paper. When an 8-bin mailbox device is connected to the printer, the default bin is the printer's standard top bin. Multifunction finisher output bins If you choose the multifunction finisher, the output bins are the upper bin (5) and the lower booklet bin (6). The upper bin (5) is the top bin on the multifunction finisher. This bin provides 1,000 sheets of stacking capacity, and can offset each job as it is stacked, delivering unstapled jobs face up or face down. This bin also provides stapling for up to 50 sheets of paper per document. The upper bin is the default output bin when the multifunction finisher is attached. The lower bin (4) is the lower bin on the multifunction finisher. This bin provides folding and saddle stitching of booklets that contain up to 10 sheets of paper. Selecting an output location It is recommended that you select an output location (bin) through your program or printer driver. (Where and how you make selections depends on your program or printer driver.) If you cannot select an output location from the program or printer driver, set the default printer output location from the printer control panel. To select an output location from the control panel 1 Use or to scroll to Configure Device and then press . 2 Use or to scroll to Printing and then press . 3 Use or to scroll to Paper Destination and then press . 4 Use or to scroll to the output bin or device you want and then press . Your network administrator might have changed the name of the device. An asterisk (*) appears next to your selection. 56 Chapter 2 Printing tasks ENWW