IBM 8840 Hardware Maintenance Manual - Page 110
Temperature, error, messages - cpu specifications
UPC - 000435863799
View all IBM 8840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Error code All SCSI Errors One or more of the following might be causing the problem: v A failing SCSI device (adapter, drive, controller) v An improper SCSI configuration or SCSI termination jumper setting v Duplicate SCSI IDs in the same SCSI chain v A missing or improperly installed SCSI terminator v A defective SCSI terminator v An improperly installed cable v A defective cable FRU/action 1. External SCSI devices must be turned on before you turn on the server. 2. Make sure that the cables for all external SCSI devices are connected correctly. 3. If you have attached an external SCSI device to the server, make sure the external SCSI termination is set to automatic. 4. Make sure that the last device in each SCSI chain is terminated correctly. 5. Make sure that the SCSI devices are configured correctly. Temperature error messages Note: See "System" on page 108 to determine which components a field service technician should replace. Message Action DASD Over Temperature (level-critical; direct access storage device bay x was over temperature) Ensure that the server is being properly cooled; see "System reliability guidelines" on page 24. DASD Over recommended Temperature (sensor x) (level-warning; hard disk drive bay x had over temperature condition) Ensure that the server is being properly cooled; see "System reliability guidelines" on page 24. DASD under recommended temperature (sensor x) (level-warning; direct access storage device bay x had under temperature condition) Ambient temperature must be within normal operating specifications; see "Features and specifications" on page 3. DASD Over Temperature (level-critical; sensor for DASD1 reported temperature over recommended range) Ensure that the server is being properly cooled; see "System reliability guidelines" on page 24. Power supply x Temperature Fault (level-critical; power supply x had over temperature condition) 1. Ensure that the server is being properly cooled; see "System reliability guidelines" on page 24. 2. Replace power supply x. System board is over recommended temperature (level-warning; system board is over recommended temperature) 1. Ensure that the server is being properly cooled; see "System reliability guidelines" on page 24. 2. Replace the system board. System board is under recommended temperature (level-warning; system board is under recommended temperature) Ambient temperature must be within normal operating specifications; see "Features and specifications" on page 3. System over temperature for CPU x (level-warning; CPU x reporting over temperature condition) Ensure that the server is being properly cooled; see "System reliability guidelines" on page 24. System under recommended CPU x temperature (level-warning; system reporting under temperature condition for CPU x) Ambient temperature must be within normal operating specifications; see "Features and specifications" on page 3. 100 xSeries 346 Types 8840 and 1880: Hardware Maintenance Manual and Troubleshooting Guide