Icom ID-1 Instruction Manual - Page 24
Connecting a PC - usb driver
View all Icom ID-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
2 INSTALLATION AND CONNECTIONS Connecting a PC D PC connection for control USB (Universal Serial Bus) cable is used for the connection between the ID-1 and a PC. An USB extension cable, OPC-1127 (1.5 m; 4.9 ft), is supplied with the transceiver for extended connection. D PC connection for data operation Ethernet cable connection is additionally required for the data operation. Connect the Ethernet receptacle to the Ethernet port on your PC directly or through the supplied extension cable with the cable coupler, if desired. ID-1 Use the supplied USB extension cable, OPC-1127 (1.5 m; 4.9 ft), if desired. to USB port PC ID-1 Cable coupler Use the supplied OPC-1069, Ethernet cable (3 m; 9.8 ft), and the cable coupler for extension, if desired. Ethernet card PC to Ethernet port to card slot NOTE: When connecting the ID-1 and the PC through an USB hub, use the self-powered type. 17 NOTE: When no Ethernet port is available with your PC, install an Ethernet card and it's driver before connecting the ID-1. Ask your local computer dealer for details about installing a Ethernet card to your computer.