Icom ID-1 Instruction Manual - Page 68

8 REPEATER OPERATION- VOICE Accessing a Digital repeater D Setting from the application qClick [MODE] to select DV (Digital voice) mode. • "DV" appears. w Set the desired receive frequency (repeater output frequency). e Click [RP] several times to select the repeater mode. • Select "RP-" or "RP+." ySet the desired near-by repeater call sign in "RPT1" then click [OK]. • Click [Z] to select the call sign. • When the desired repeater call sign is not programmed, enter the call sign into the text box directly. • When linking repeaters via internet network (gateway connection), clicking [G] may be necessary depending on the repeater system. Appears Click rClick [CS] to display the Select Call Sign screen, then set your call sign in "MY." • Click [Y]/[Z] to select the programmed your call sign. • When your call sign is not programmed, enter your call sign into the text box directly. t Set the desired station call sign in "YOUR." • When sending a CQ - Click [CQ] to displays "CQCQCQ" then click [OK]. • When calling the desired station - Click [Z] to select the call sign. • When the desired call sign is not programmed, enter the desired call sign into the text box directly. 61 Select/enter the desired call sign Click if necessary. ; or click to display "CQCQCQ" for CQ call. uClick "Enable" to display "✔," then set the near-by repeater call sign from the desired station in "RPT2" then click [OK], if necessary. • Click [Z] to select the call sign. • When the desired repeater call sign is not programmed, enter the call sign into the text box directly. • When linking repeaters via internet network (gateway connection), clicking [G] may be necessary depending on the repeater system. Click if necessary. Click to shows "✔" and select/enter the desired repeater call sign, if desired.