Icom ID-1 Instruction Manual - Page 69
For practical digital repeater operation, How to make a CQ call to another Zone?
View all Icom ID-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
8 REPEATER OPERATION- VOICE i Push and hold [PTT] to transmit; release [PTT] to receive. oClick [RP] several times until the "RP-" or "RP+" indicator disappears to return to simplex operation. Hint! When using the gateway connection capabilities, the D-STAR system repeater automatically searches for the nearest repeater from the desired station that you want to call even when you don't know the desired station is in which Area or Zone. How to make a CQ call to another Zone? When you want to make a CQ call to another Zone, set the call signs as follows. e.g.: Another Zone's repeater call sign= xx0xxx, the nearest repeater call sign= xx1xxx the gateway repeater call sign= xx2xxx q Enter "/xx0xxx" into "YOUR" (or "UR" in RC-24). w Enter "xx1xxx" into "RPT1" (or "RPT1" in RC-24). e Enter "xx2xxx_G" into "RPT2" (or "RPT2" in RC-24). *Some repeater system requires the "G" setting with clicking [G] in "Select Call Sign" screen or pushing [ ] for 0.5 sec. on RC24). For practical digital repeater operation When using a digital repeater in digital voice mode, the transmission must be performed after the repeater signal disappears completely. Otherwise the communication error may occur. NOTE: The required call sign settings may differ according to the repeater system (Area or Zone). Ask the repeater system manager for setting details. 8 62