Icom ID-1 Instruction Manual - Page 94
Call Sign, YOUR, RPT1, RPT2, Memory Name
View all Icom ID-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
11 SCAN OPERATION • Call Sign- YOUR, RPT1, RPT2 Click to select the cell, then enter the desired station or repeater call sign from the PC keyboard directly. • Memory Name Click to select the cell, then enter the desired memory name from the PC keyboard directly. tRepeat the steps w to r to program another scan edge channel. yTo close the Memory Channel screen, click " " in tool bar or click " ." D Programming with the RC-24 q Set the desired scan edge frequency in VFO mode. ➥ Set the operating mode with [MODE] ➥ Set the frequency using [DIAL] or keypad. ➥ Set other data (e.g. station call sign, tone information, etc.) if required. w Push [MW•6] momentarily. • Memory channel number blinks. [MW•6] eRotate [DIAL] to select a scan edge channel to be programmed. • Select "MPA" as the PA, "MPB" as the PB channel. r Push [MW•6] for 0.5 sec. to program. • 3 beeps sound. • Scan edge channel number automatically increases when continuing to push [MW•6] after programming. tRepeat the steps q to r to program the another scan edge channel. 87