Icom ID-1 Instruction Manual - Page 56
Short message function
View all Icom ID-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
7 TRANSMIT AND RECEIVE- VOICE Short message function ID-1 has a short message function in Digital Voice mode operation. This function allows simultaneous 20-character (max.) message transmission or reception with the voice communication. D Short message operation- application q During Digital Voice operation, click [MSG]. • Set the desired operating frequency and call sign, etc., in advance. • "Message Reception and Transmission" screen appears. Click wType the desired message into the "Setup of message," then click [OK]. • Up to 20-character message can be set. • Up to 6 messages can be stored for transmission. • When selecting a stored message, click [Y]/[Z]. eClick "Message is transmitted" check box to display "✔" mark. 49 r Push [PTT] to make a call. • The message is transmitted immediately with your voice. • When transmitting continuously, the message is transmitted in each 30 sec. tWhen a message is received, the contents and the call sign are displayed in the RX area. • Up to 20 messages can be stored for reception. • The same message sending from the same call sign station won't be displayed repeatedly. yTo close the screen, click " " in the screen, or click [MSG] in the main screen. Type the message. Click to select the message. Click to display "✔" to transmit the message. Received message and call sign are displayed here. See the note below. NOTE: The "Message Reception and Transmission" screen displayed automatically when a new message is received in default setting. This can be turned OFF if desired. • ON ("✔") : The screen automatically appears when a new message is received. (default) • OFF (no "✔") : The screen appears only when [MSG] is clicked.