Icom ID-1 Instruction Manual - Page 96
Scan resume condition
View all Icom ID-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
11 SCAN OPERATION Scan resume condition [ The scan resume condition can be selected as timer or pause scan. The selected resume condition is also used for priority watch. (pgs. 86, 87) D Setting from the application q Display the Set Mode screen. - Select "Edit Set Mode(C)..." in View menu. - Click " " in tool bar. - Press [F7] key on the PC keyboard. wDouble click the "Scan Resume Timer" cell, then select the desired scan resume condition from "P-2," "T-5," "T-10" and "T-15." • Resuming conditions • "P-2" : Scan pauses until the signal disappears and then resumes 2 sec. later. • "T-5" : Scan pauses 5 sec. while receiving a signal. • "T10" : Scan pauses 10 sec. while receiving a signal. • "T-15" : Scan pauses 15 sec. while receiving a signal. eTo close the Set Mode screen, click " " in tool bar or click " ." D Setting from the RC-24 q Push [TXinh• ] for 0.5 sec. to enter set mode. wPush [MODE] or [TXinh• ] several times to select "Scan Timer" item. • Select "ON" for "Extension" item in advance. [TXinh• ] [MODE] Double click then select the desired scan resume condition. T-10 Scan Timer e Rotate [DIAL] to select the desired scan resume condition. • See "•Resuming conditions" above. r Push [PWR] momentarily to exit set mode. 89