Icom ID-1 Instruction Manual - Page 81
Programming a memory/call channel
View all Icom ID-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
MEMORY/CALL OPERATION 10 Programming a memory/call channel VFO settings, including the set mode contents such as repeater tone frequency, offset, can be programmed into a memory and call channel. D Programming from the application - main screen q Set the desired frequency in VFO mode. ➥ Set the operating mode with [MODE]. ➥ Set the frequency using [DIAL] or keypad. ➥ Set other data (e.g. station call sign, tone information, etc.) if required. w Click [MW] to display the Memory programming screen. eSelect the desired memory or call channel number by right clicking or left clicking on the [DIAL] in the screen. • Click "MEMORY" to select memory, or click "CALL" to select call channel. Click to select Shows the selected memory Right click to move memory or call channel number and or call channel number up. previously programmed fre- Left click to move memory or quency. call channel number down. 10 rClick [MW] on the Memory programming screen to pro- gram. Click Click tTo close the Memory programming screen, click [MW] on the main screen again or click " ." 74