Icom ID-1 Instruction Manual - Page 82

10 MEMORY/CALL OPERATION D Programming from the application - Memory Channel screen q Display the Memory channel screen. - Select "Edit Memory Channel(M)..." in View menu. - Click " " in tool bar. - Press [F6] key on the PC keyboard. wClick to select the "Freq." cell of desired memory or call channel, then enter the desired operating frequency from the PC keyboard directly. Click to select, then enter the desired operating frequency. eDouble click the Mode cell in the same memory/call channel, then select the desired operating mode. r Set the other items as follows. • Repeaters- RP Double click the cell, then select the desired duplex condition. • Repeaters- Offset Freq. Click to select the cell, then enter the desired offset frequency from the PC keyboard directly. • TONE/TSQL- Tone Select Double click the cell, then select the desired tone condition. • TONE/TSQL- Repeater Tone, TSQL Tone Double click the cell, then select the desired tone frequency. Double click the Mode cell, then select the desired operating mode. • Digital- DSQL Double click the cell, then select the desired digital squelch condition. • Digital- Code Click to select the cell, then enter the desired digital code number from the PC keyboard directly. 75