Icom ID-1 Instruction Manual - Page 60
Monitor function
View all Icom ID-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
7 TRANSMIT AND RECEIVE- VOICE Monitor function The monitor function releases all squelch mutes, noise squelch, tone squelch, digital code squelch and digital call sign squelch, to monitor the signal on the displayed frequency. ➥ Click [MONI] in the application (main screen); or push and hold [SQL] on the RC-24 to activate the monitor function. • "MONI" and " BUSY " appear for FM mode, "MONI" appears for DV and DD mode operation when the function ON. (main screen) • " " appears on the RC-24 function display while holding [SQL] for FM operation. • The displayed frequency shifts when duplex (RP- or RP+) is set. D Monitoring mode selection Under normal settings, an FM mode signal cannot be heard, even when the monitor is turned ON. There is an exception, and this is when you have the Digital monitor set to the Analog mode. This will allow an FM mode signal to "Break-in" during digital communications. • Setting from the application qDisplays set mode screen by performing one of the follow- ing operations. - Select "Edit SetMode(C)..." in view menu. - Click " " button in tool bar. - Click [SET]. - Press [F7] key on the PC keyboard. wDouble click "Digital Monitor" cell, then select the desired monitoring mode from "DIGITAL" and "ANALOG." • ANALOG: FM mode, DIGITAL: Digital • To close the screen, click " " or repeat the operation as step q. Appears Click [SQL] 53 Double click the Digital. Monitor cell, then select the desired monitoring mode.